The lastest workwear news and tips

Tree Surgeon Clothing: What to Wear and When to Wear It

Posted by Xamax on 31/08/17 06:02

Tree surgeons prune and treat old or damaged trees in order to preserve them, but this type of work involves working at heights, lifting heavy loads, and utilizing dangerous equipment, which means it can be hazardous work. What is tree surgeon clothing? How do you buy it? Here’s what to wear and when to wear it. 

 

tree-surgeon-clothing.jpg
image credit

Protecting the Head and Face

Tree surgeons and arborists need to consider protecting their entire head: face, ears, head, and eyes from wood chips and chainsaw impact if kickback occurs. Tree surgeons need to wear protective hard hats, visors and/or eye protection, and ear protection.

 

Hard hats

  • All arborists and tree surgeons need to invest in an appropriate, protective hard hat.
  • Specialist hard hats for tree surgeons are an all in one, protecting the face, ears, and head with attached visors and ear defenders too.
  • Chainsaws can easily cut into hard hats if the chainsaw has kickback.
  • The sun weakens the hat over time and should be replaced every 3-5 years.
  • If cracking is heard, replace the hat immediately.
  • Hard hats must meet EU EN 397 standards.

portwest endurance helmet.png

Protective face visor and eye protection

  • Many tree surgeons opt for a mesh visor that attaches to their helmet.
  • Both mesh and polycarbonate visors protect against twigs and wood chips penetrating the eyes.
  • Mesh visors are adequate because quality chainsaws do not produce sawdust, only uniform chips that cannot penetrate these speciality mesh visors.
  • Some tree surgeons opt to wear additional eye protective goggles underneath visors, or simply wear safety goggles without visors; it’s all up to individual preference.
  • Polycarbonate visors can become hot in the summer, and some of these visors (as well as the mesh ones) come pre-attached to hard hats with added ear defenders as well.  

portwest forestry combi kit.jpeg 

Ear defenders

  • Many tree surgeon hard hats come with ear defenders attached; however, some arborists opt to wear additional ear protection in the form of disposable and non-disposable ear plugs.
  • Non-electric chainsaws are usually 115 dB with the recommended exposure limit of 85 dB, so it’s vital that tree surgeons reduce noise to acceptable levels with a combination of ear defenders and ear plugs.

 

Dust masks

  • Some tree surgeons may opt to wear dust masks under their mesh visors for added respiratory protection.
  • However, the practice of dust masks is not common. 

 Tree surgeon image.jpegimage credit

Protecting the Body

Most chainsaws have safety features to address kickback problems, and to reduce the risk of injury from chain breakage; however, the EU requires that arborists and tree surgeons wear chainsaw trousers, boots, and gloves, which means the fabric will have chainsaw protective fabric, and have a special chainsaw logo. This logo indicates that the fabric has been tested to protect the wearer properly; it also shows the class of protection and the rated maximum chain speed for that type of fabric.

 

Utility pants and chainsaw protective clothing

Even though chainsaw protective clothing has come a long way, the struggle is providing fabric that saves against violent impact, but is also light, flexible, and comfortable. Some more protective fabrics make the wearer too hot, and prevent movement, which is equally unsafe, so there has to be a balance between the two. Chainsaw protective fabric has extra fabric layers to improve cut resistance. Chainsaw manufacturers improve their safety features instead because fabrics can only withstand so much.

 

Chainsaw clothing is designed to slow the chain’s rate of cutting and clog the mechanism and not protect the wearer entirely.

 

  • Arborists and tree surgeons opt either to wear just chainsaw protective utility pants or an entire suit of chainsaw protective fabric.
  • The choice is up to the weather and the individual.
  • Higher class trousers are more expensive, hotter, and heavier, and are chosen to match the saw speed.
  • Some trousers protect only the front of the leg, and others are more like chaps, worn over conventional work clothes and trousers.
  • A tree surgeon can either purchase utility trousers, and then use chainsaw protective chaps, or wear speciality trousers.
  • Tree surgeons often wear belts and braces to help keep protective clothing in place.
  • Material may deteriorate over time if washed too often in hot water, so make sure you care for your trousers and chaps properly; however, other types of trousers need to be washed routinely to maintain protective properties like Avertic.
  • All chainsaw trousers must comply with EU EN381-5.

 

Hi-vis Jackets and T-shirts

  • Most tree surgeons opt to wear hi-vis jackets and/or t-shirts to be more visible.
  • All chainsaw protective jackets must comply with EU EN381-11.

tree surgeon hi vis.jpg
image credit

Chainsaw Protective Gloves and General Purpose Gloves

  • Chainsaw gloves are made of cut-proof fabric like the fabric for trousers, but generally only for the back of the left hand.
  • Chainsaw gloves should not be overly padded since the gloves need to be flexible.
  • Some tree surgeons opt for a leather mitt for operator’s left hand from kickbacks when it’s on the bar of the chainsaw.
  • Most injuries occur on the back of the left hand.
  • Gloves should comply with EN381-7.

portwest oak chainsaw protective glove.jpeg 

Protective Boots

  • Chainsaw boots are based on steel-toe boots with added layers of chainsaw protective fabric on any exposed surfaces.
  • They also have lace-up leather boots or rubber wellington boot versions.
  • Boots are designed to protect wearers from front and sideways cuts.
  • Protective gaiters are also available if they meet EN381-9 over general steel toe boots for occasional users, but not professionals.
  • Boots should comply with EN345-2 as well as general EN203045 regulation and EN381-3 for chainsaw use.

 

Specialty Arborist Equipment

Arborists and tree surgeons cannot operate without speciality equipment to help them do their jobs effectively and safely. Make sure you have the following equipment to protect you from heights, help with heavy lifting, and provide weights and balances when moving tree limbs down to the ground.

  • Rigging Carabiners and Connectors
  • Rigging Ropes
  • Pulleys
  • Lowering Devices
  • Winces and Hauling Devices
  • Enforcer Load Cell
  • Rigging Plates and Rings
  • Strops and Slings
  • Chainsaw with safety features
  • Stocked first aid kit

Whistle and Cell Phone

The UK recommends that workers have a whistle to call for help when injured, and have a cell phone to call emergency services. Even if colleagues are close by they might not be able to hear shouts between chainsaw noise and protective ear wear.

tree surgeon in the top of a tree.jpeg
image credit

When should I wear this protective gear?

Make sure that any time you go to work as a tree surgeon or arborist, you’re wearing the maximum amount of protective gear because it only takes once to have an accident. Always wear head to toe protection. For hotter weather, you may opt to wear a t-shirt instead of a full chainsaw protective jacket; however, it’s important to be extra careful when you’re wearing less gear.

Being a tree surgeon is dangerous work, so make sure you stay safe, wear the right protective clothing, and use the right speciality equipment.

 

Are you choosing the right PPE equipment for your tree surgery business?

Download our FREE PPE checklist to make sure you’re PPE complaint.

PPE Checklist CTA Slim

Topics: Buying Workwear, PPE